Commercially Available Tools And Materials
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
| Overview | Page |
|---|---|
| Fin comb | see illustration |
| Charging hoses 5/8" - 18 UNF with valve opener | see illustration |
| Connection piece for refrigerant cylinder and seal with quick-release coupling connection or threaded connection 5/8" - 18 UNF | see illustration |
| Valve caps 5/8"-18 UNF | see illustration |
| Pressure gauge set with pressure reducer for nitrogen | see illustration |
| Quick-release coupling adapter for service connections, 2x included in scope of delivery of service station | see illustration |
| The wrench size depends on the threaded connections on the refrigerant lines. | Not illustrated |
| Valve opener for charging hoses | Not illustrated |
| Connecting nipple for conical seal 5/8"-18 UNF | Not illustrated |
| Compressed-air gun with rubber end piece | Not illustrated |
| Combined fine filter unit for compressed-air system (oil, dirt and water separator as used for painting facilities). | Not illustrated |
| Valve opener for Schrader valve | Not illustrated |
| Hand shut-off valve 5/8"-18 UNF | Not illustrated |
| Recycling container for refrigerant R134a | Not illustrated |
| Digital thermometer | Not illustrated |
| Protective gloves not illustrated | Not illustrated |
| Protective glasses | Not illustrated |
| Refrigerant R134a with cylinder (capacity as required) | Not illustrated |