LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1043 (Engine Lubrication System (Service Information - CLAB, CLAA, CDUC, CGQB, CKVB, CKVC, CDUD, CPNB, CTCB, CTCC, CVUA, CVUB)) >> 17 Lubrication >> Engine Oil Cooler >> Engine Oil Cooler/Coolant Shut-Off Valve Mounting Plate, Removing And Installing >> Installing

Engine Oil Cooler/Coolant Shut-Off Valve Mounting Plate, Removing And Installing: Installing

WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following: 

NOTE:

Replace the seals

-- Install the engine oil cooler. Refer to ENGINE OIL COOLER, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals