LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1042 (Ignition/Glow Plug System (CLAB, CLAA, CDUC, CGQB, CKVB, CKVC, CDUD, CPNB, CTCB, CTCC, CVUA, CVUB)) >> 28 Ignition/Glow Plug System >> Glow Plug System >> Glow Plug, Removing And Installing >> Installing

Glow Plug, Removing And Installing: Installing

WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

-- Carefully install the glow plugs by hand or with a hose without tilting it.

-- Tighten the glow plugs with :3220  or :VAS6454  with a suitable socket.

-- Connect the glow plug connector back on the respective glow plug and check the connectors for secure fit.

Perform the rest of the installation in the reverse order of removal.

scientia non olet · About LEMON Manuals