LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1042 (Ignition/Glow Plug System (CLAB, CLAA, CDUC, CGQB, CKVB, CKVC, CDUD, CPNB, CTCB, CTCC, CVUA, CVUB)) >> 28 Ignition/Glow Plug System >> Glow Plug System >> Engine Speed Sensor -G28-, REMOVING AND INSTALLING >> Removing >> Vehicles with S tronic Transmission 0B5

Vehicles with S tronic Transmission 0B5

WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Bolts And ATF Cooler
GWWA37-11125Courtesy of AUDI OF AMERICA, LLC

-- Remove bolts -arrows- and move the ATF cooler slightly to the side.

-- Disconnect the connector -2-.

Fig 2: Engine Speed Sensor -G28- Component Location
GWWA28-10058Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1- and the Engine Speed Sensor -G28-.