Side Window, Installing, AVANT

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Procedure

-- Installation Instructions. Refer to INSTALLATION INSTRUCTIONS FOR BONDED WINDOWS .

-- Prepare the undamaged window glass for installing. Refer to UNDAMAGED WINDOW GLASS, PREPARING FOR INSTALLATION .

-- Prepare the new window glass for installation. Refer to NEW WINDOW GLASS, PREPARING FOR INSTALLATION .

-- Prepare the body flange for installation. Refer to BODY FLANGE, PREPARING FOR INSTALLATION .

NOTE:

Use One-Part Window Adhesive :DH 009 100 03 (small cartridge). If more than one window glass must be installed, the Two-Part Window Adhesive Kit :D 004 600 A2 can also be used.

-- The roof trim molding and side trim molding must be installed before installing the side window.

-- Install the side window and centering pins into the window flange and press it all the way into the body.

NOTE:

Side window without centering pins must be secured to the body with adhesive tape.