Adhesive, Cleaning If Contaminated
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Adhesive Remover:D 002 000 10 is recommended as a cleaning solution. Follow all safety precautions when processing.
WARNING:
When cleaning from inside the vehicle interior, do not press out on the window that was just installed.
Painted Surfaces
-- First clean the painted surface with a dry cloth. Remove residual adhesive with Adhesive Remover:D 002 000 10 .
Plastic Trim Panel
-- Let the adhesive sealant harden (approximately 1 hour) and then remove it.