LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1038 (Engine Lubrication System (Service Information - CREC, Cred, CREH)) >> 17 Lubrication >> Engine Oil Cooler >> Engine Oil Cooler, Removing And Installing >> Installing

Engine Oil Cooler, Removing And Installing: Installing

WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following: 

NOTE:

Replace the bolts that were tightened with an additional turn.

Replace the seal after removal.

Secure all hose connections with hose clamps. Refer to the parts information.

Do not reuse used coolant.

-- Fill with coolant. Refer to COOLANT, DRAINING AND FILLING .

scientia non olet · About LEMON Manuals