Oil Separator, Removing And Installing: Installing
WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
NOTE:
Replace the seal after removal.
- Replace the connection -arrow-.
-- Install the Fuel Pressure Sensor -G247-. Refer to Fuel Pressure Sensor -G247-, REMOVING AND INSTALLING .
-- Install the upper coolant pipe. Refer to UPPER COOLANT PIPE, REMOVING AND INSTALLING .