Telematics Interface Control Module -J1221-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment and remove the ignition key.
-- Remove the luggage compartment floor covering.
-- Remove the nuts -arrows- on the bracket -2-.
-- Pull the bracket -2- from the threaded pin and release and disconnect the connectors.
First the Telephone Interface -RX8- -1- must be unclipped.
-- Press the Telematics Interface Control Module -J1221- -1- out of the bracket -2-.