MULTIFUNCTION Buttons, Removing And Installing, 3-Spoke Steering Wheel: Notes
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Trim Removal Wedge :3409
The multifunction buttons -2- are clipped to the decorative trim -1-. The decorative trim -1- and the multifunction buttons -2- are attached to the steering wheel. The multifunction buttons -2- have an extra retainer -3-.
When removing, first make sure the decorative trim -1- can be loosened by hand (approximately 5 mm). Then, using the :3409 , open the retainers -3- on the multifunction buttons -2- and remove the decorative trim -1- together with the multifunction buttons -2-.
- Decorative Trim
Arrows - catches
- Multifunction Button
- Retainer
-- Turn off the ignition and all electrical equipment and remove the ignition key.