LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1036 (Engine Lubrication System (Service Information - CEUC, CRDB, CTGE, CWUB, CWUC)) >> 17 Lubrication >> Oil Circuit >> Mechanical Switch Valve, Removing And Installing >> Installing

Mechanical Switch Valve, Removing And Installing: Installing

WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.

Install In Reverse Order Of Removal And Note The Following: 

NOTE:

Replace the O-rings.

-- Install the cover in the Inner-V. Refer to COVER IN THE INNER-V, REMOVING AND INSTALLING .