LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1034 (Ignition/Glow Plug System (CEUC, CRDB, CTGE, CWUB, CWUC)) >> 28 Ignition/Glow Plug System >> Ignition System >> Knock Sensor, Removing And Installing >> Knock Sensor 3 -G198-, REMOVING AND INSTALLING >> Removing

Knock Sensor 3 -G198-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the A/C compressor. Refer to COMPRESSOR .

-- Remove the connector -2- from the bracket and disconnect it.

GWWA24-11008Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1- and then the Knock Sensor 3 -G198-.

NOTE:

Ignore item -3-.

scientia non olet · About LEMON Manuals