Tightening Specifications

WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Replace any bolts that were tightened with an additional turn.

-- Tighten the bolts in steps in the sequence shown:

Step	Bolts	Tightening Specification/Additional Turn
1.	-1 to 8-	5 Nm
2.	-1 to 8-	Tighten an additional 90°

NOTE:

The mount -arrow- is affixed with the timing chain guard.

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Replace any bolts that were tightened with an additional turn.

-- Tighten the bolts in steps in the sequence shown:

Step	Bolts	Tightening Specification/Additional Turn
1.	-1 to 8-	5 Nm
2.	-1 to 8-	Tighten an additional 90°

NOTE:

Ignore item -1-.

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Replace any bolts that were tightened with an additional turn.

-- Tighten bolts in stages as follows:

Step	Bolts	Tightening Specification/Additional Turn
1.	-Arrows-	5 Nm
2.	-2 to 8-	8 Nm diagonally
3.	-Arrows-	8 Nm
4.	-2 to 8-	In a diagonal sequence, turn an additional 90°
5.	-Arrows-	Tighten an additional 90°