LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1030 (Suspension System (Self-Leveling - Service Information)) >> Self-Leveling Suspension >> Electronic Damping >> System, Venting Or Filling

System, Venting Or Filling

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

The Bleeding/Filling Of The Air Suspension System Is Performed Using The Vehicle Diagnostic Tester.

VASPC 

Connect Vehicle Diagnostic Tester.

-- Select Guided Functions  mode.

-- Select the "34 - Level Control System Control Module" address.

-- Select "J197 - venting or filling the system" and follow the instructions on the screen.

ODIS - Offboard Diagnostic Information System 

Connect Vehicle Diagnostic Tester.

-- Select Diagnostic  operating mode and start diagnostics.

-- Select the Control Module  tab.

-- Select the "34 - Level Control System Control Module" address.

-- Select "J197 - venting or filling the system" and follow the instructions on the screen.

scientia non olet · About LEMON Manuals