Vehicle With All Wheel Drive Clutch: Installing
WARNING: This page is about a different car, the 2018 Audi A6, 2017 Audi A6, and 2016 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
-- Lightly coat the outer edge of the seal.
-- Fill the space between the sealing lip and the dust lip halfway with Sealing Grease.
-- Place the seal with the : T40367/1 .
-- Press in the seal all the way using the :T40367/2 .
-- Install the all wheel drive clutch. Refer to appropriate service information. .
-- Install the driveshaft. Refer to REMOVAL AND INSTALLATION .