Overview - Rear Lid, Rear Lid Motor, AVANT
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Rear Lid Motor 2 -V445-
- Removing and Installing. Refer to REAR LID MOTOR 1 AND 2 -V444- / -V445-, REMOVING AND INSTALLING, AVANT .
- Bolt
- 21 Nm
- Connector
- Disconnect the connector before removing the drive unit.
- Bracket
- Bracket is positioned with a device in factory and must not be adjusted.
- Bolt
- 8 Nm
- Roof Frame
- Bolt
- Self-tapping
- Tightening specification, refer to -item 7- Bolt.
- Lid Hinge
- Removing and Installing. Refer to HINGES, REMOVING AND INSTALLING, AVANT .