LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1024 (Exterior System (Hood & Lids - Service Information)) >> 55 Hood, Lids >> Hood >> Hood, Adjusting >> Procedure >> Height Adjustment Stop Buffer

Height Adjustment Stop Buffer

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
GWWA55-10705Courtesy of AUDI OF AMERICA, LLC
  1. Stop Buffer
    • The stop buffer -1- also works as a strike guard.
  2. Hood
  3. Adjusting Buffer
    NOTE:

    The adjusting buffers -2- are used for the hood height adjustment.

    • The adjusting buffer -2- must lightly contact the lock carrier when the hood is closed.
scientia non olet · About LEMON Manuals