LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1023 (General Maintenance (1 Of 2)) >> Maintenance >> Procedure Descriptions >> Tilt/Slide Sunroof, Cleaning And Lubricating >> Clean and Coat the Guide Rail

Clean and Coat the Guide Rail

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Open the glass sunroof panel entirely.

-- Remove the grease and remaining dirt on the guide rail with a lint-free cloth. (If necessary, remove sand and fine pollen from the guide rails with a shop vacuum).

-- Apply G 060 751 A2 grease on the inside of the guide rail -arrow- with a commercially available paint brush.

GWWA00-10545Courtesy of AUDI OF AMERICA, LLC

-- Apply G 060 751 A2 grease on the outside of the guide rail -arrow- with a commercially available paint brush.

GWWA00-10547Courtesy of AUDI OF AMERICA, LLC

-- Apply G 060 751 A2 grease on the side guide rail -arrow- with a commercially available paint brush.

GWWA00-10546Courtesy of AUDI OF AMERICA, LLC

-- Remove the excess lubricant from the guide rails with a lint-free cloth.

-- Repeat the process for the opening on the opposite side of the vehicle.