LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1022 (Climate Control System (Precautions & Technical Data - Refrigerant R1234YF)) >> 00 General, Technical Data >> Technical And Physical Principles >> Pyrotechnical Characteristics >> Critical Point

Critical Point

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

The critical point (critical temperature and critical pressure) means the substance has gone above the point when there is no longer a boundary between liquid and gas.

A substance above its critical point is always in the gaseous state.

At temperatures below the critical point, all types of refrigerant in pressure reservoirs exhibit both a liquid and a gas phase meaning there is a layer of gas above the liquid.

As long as there is still gas present in the container next to the fluid, pressure is dependent on ambient temperature. Refer to REFRIGERANT VAPOR PRESSURE TABLE .

NOTE:

The refrigerants used in vehicles must not be mixed. Only the refrigerant designated for the corresponding A/C system may be used.

The vapor pressure of both refrigerant R1234yf and R134a are very similar across a large temperature range for this reason no differentiation of the two refrigerants is possible. Refer to REFRIGERANT VAPOR PRESSURE TABLE  and A/C SYSTEM, GENERAL INFORMATION . Distinguishing is only possible by suitable sensors which can analyze the chemical characteristics of the refrigerant. Refer to REFRIGERANT R1234YF ANALYSIS .