Shock Absorbers, Checking On Shock Tester: Notes
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Maha Shock Absorber Tester:VAS1990
- Suspension Strut Test Bed:VAS6636
- Suspension Strut Test Bed:VAS6640
Shock absorbers can be checked while installed using the shock tester (shock absorber testing device). The damping effect can be evaluated based on the dial reading or print-out.
Test Prerequisites
- Temperature 10 through 40 °C (50 °F through 104 °F).
- Driver in vehicle.
- Tire pressure OK.
- Drive vehicle straight onto center of wheel contact plates.
- Front wheels in straight position.
- Electromechanical parking brake loosened, foot brake not actuated.