LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1013 (Suspension System (Rear - Service Information)) >> 42 Rear Suspension >> Suspension Strut/Shock Absorber, Spring >> Spring, Removing And Installing >> Spring, Removing And Installing, Coil Spring >> Notes

Spring, Removing And Installing, Coil Spring: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required 

WARNING:
  • Before removing and installing the coil spring the :VAS6274  with the :VAS6274/10  must be retrofitted.
  • Retrofit the :VAS6274  with the :VAS6274/10  . Refer to SPRING TENSIONING SYSTEM, CONVERTING .
NOTE:

The rest of the tools from the :VAS6274/10  are needed later in the procedure.

GWWA42-10204Courtesy of AUDI OF AMERICA, LLC
  1. : VAS6274/10-1 
  2. : VAS6274/10-2 
  3. Locking device Bolts
  4. : VAS6274/10-4 
  5. Sleeve
scientia non olet · About LEMON Manuals