Overview - SUBFRAME, Vehicles With Fwd
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 115 Nm +90° turn
- Always replace if removed
- Front Bonded Rubber Bushing
- Replace on both sides.
- Always Replace. Refer to SUBFRAME FRONT BEARING, REPLACING, VEHICLES WITH FWD .
- For the subframe mounting
- There are different versions.For the correct allocation. Refer to the Parts information.
- Oil on the hydraulic bonded rubber bushing is a sign of wear.
- Spacer
- Depends on construction. Refer to the Parts information for the allocation.
- Subframe
- Subframe with attachments, removing and installing. Refer to SUBFRAME, REMOVING AND INSTALLING, FWD VEHICLES .
- Subframe, securing. Refer to SUBFRAME, SECURING, FWD .NOTE:
An AWD subframe is installed for hybrid vehicles. For the correct allocation. Refer to the Parts information. Performing repairs on the subframe is not affected.
- Spacer
- Depends on construction. Refer to the Parts information for the allocation.
- Rear Bonded Rubber Bushing
- Replace on both sides.
- Always Replace. Refer to SUBFRAME REAR BEARING, REPLACING, VEHICLES WITH FWD .
- For the subframe mounting
- There are different versions.For the correct allocation. Refer to the Parts information. .
- Oil on the hydraulic bonded rubber bushing is a sign of wear.
- Brace
- Depends on construction. Refer to the Parts information for the allocation.
- Bolt
- 115 Nm +90° turn
- Always replace if removed
- Rear Stone Chip Protection
- Depends on construction. Refer to the Parts information for the allocation.
- Clips
- Depends on construction. Refer to the Parts information for the allocation.
- Front Stone Chip Protection
- Depends on construction. Refer to the Parts information for the allocation.
- Clip
- Depends on construction. Refer to the Parts information for the allocation.
A - Hydraulic Bonded Rubber Bushing
B - Conventional Bonded Rubber Bushing
Equipment version with brace: without stop plate.