LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1012 (Brake System (Precautions & General Information)) >> 00 General, Technical Data >> Technical Data >> Technical Data, Brakes

Technical Data, Brakes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Steel Front Brakes
Brake   FBC-60 16". Refer to (1). FBC-60 17". Refer to (1).
PR number   LA 1LJ
Brake rotor, ventilated Diameter in mm 320 345
Brake rotor, new thickness mm 30 30
Brake rotor, wear limit mm 28 28
Brake pads, wear limit mm
(1) Allocation. Refer to the parts information.
NOTE:

Maximum lateral run-out of steel brake rotor = 0.06 mm

Measurement in installed brake rotor

Use Dial Indicator Bracket - VAS 6079/1; Dial Indicator - 0-10mm - VAS 6079.

Clean dirt and rust off the brake rotor.

Measure 10 mm away from the outer edge of the brake rotor.

Front Brakes
Type   Brembo (17" brakes)
PR number   1LP
Brake rotor, ventilated Diameter in mm 345
Brake rotor, thickness mm 30
Brake rotor, wear limit mm 28
NOTE:

Maximum lateral run-out of steel brake rotor = 0.06 mm

Measurement in installed brake rotor

Use Dial Indicator Bracket - VAS 6079/1; Dial Indicator - 0-10mm - VAS 6079.

Clean dirt and rust off the brake rotor.

Measure 10 mm away from the outer edge of the brake rotor.

Steel Front Brakes
Brake   2 FNR-AL 42 17". Refer to (1). Brembo 19". Refer to (1). Brembo Wave-Design 19". Refer to (1).
PR number   1LL, 1LF, 1LG, 1ZK and FM0 1LU and 1LV 1LM and 1LX
Brake rotor, ventilated Diameter in mm 356 400 390
Brake rotor, new thickness mm 34 38 36
Brake rotor, wear limit mm 32 36 34
Brake pads, wear limit mm
(1) Allocation. Refer to the parts information.
NOTE:

Maximum lateral run-out of steel brake rotor = 0.06 mm

Measurement in installed brake rotor

Use Dial Indicator Bracket - VAS 6079/1; Dial Indicator - 0-10mm - VAS 6079.

Clean dirt and rust off the brake rotor.

Measure 10 mm away from the outer edge of the brake rotor.

Ceramic Front Brakes
Brake   Brembo 19". Refer to (1). Brembo 19". Refer to (1).
PR number   1LW 1LN
Brake rotor, ventilated Diameter in mm 400 420
Brake rotor, new thickness mm 38 40
Brake rotor, wear limit mm Brake Rotor Thickness. Refer to CERAMIC BRAKE ROTOR, DETERMINING WEAR .
Brake pads, wear limit mm
(1) Allocation. Refer to the parts information.
Steel Rear Brakes
Brake         Wave-Design
PR number   1KW. Refer to (1). 2EA, 2EE, 2EJ, 1KD. Refer to (1). 1KY and 1KZ. Refer to (1). 1KJ and 1KQ. Refer to (1).
Brake rotor, ventilated Diameter in mm 300 330 356 356
Brake rotor, new thickness mm 12 22 22 22
Brake rotor, wear limit mm 10 20 20 20
Brake pads, wear limit mm
(1) Allocation. Refer to the parts information.
NOTE:

Maximum lateral run-out of steel brake rotor = 0.06 mm

Measurement in installed brake rotor

Use Dial Indicator Bracket - VAS 6079/1; Dial Indicator - 0-10mm - VAS 6079.

Clean dirt and rust off the brake rotor.

Measure 10 mm away from the outer edge of the brake rotor.

Rear Ceramic Brakes
PR number   1KK, and 1KU. Refer to (1).
Brake rotor, ventilated Diameter in mm 370
Brake rotor, thickness mm 30
Brake rotor, wear limit mm Brake Rotor Thickness. Refer to CERAMIC BRAKE ROTOR, DETERMINING WEAR .
Brake pads, wear limit mm
(1) Allocation. Refer to the parts information.
scientia non olet · About LEMON Manuals