Overview - Vacuum Pump, Vehicles With 4.0L TFSI Engine
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- O-ring
- Replace after removing
- Oil Line
- Seals
- Replace after removing
- O-ring
- Replace after removing
- Vacuum Pump
- Removing and installing. Refer to VACUUM PUMP, REMOVING AND INSTALLING, 4.0L TFSI ENGINE .
- Vacuum Hose
- Vacuum Line
- Vacuum Line
- With integrated check valve
- The check valve cannot be replaced separately
- Checking the check valve. Refer to CHECK VALVE, CHECKING .
- Removing and installing. Refer to CHECK VALVE WITH VACUUM HOSE IN PLENUM CHAMBER, REMOVING AND INSTALLING .
- Brake Booster Pressure Sensor -G294-
- Removing and installing. Refer to BRAKE BOOSTER PRESSURE SENSOR, REMOVING AND INSTALLING .
- O-ring
- If damaged, replace the Brake Booster Pressure Sensor -G294-
- Not individually available
- Grommet
- Bolt
- 9 Nm
- Bolt
- 9 Nm
- Banjo Bolt
- 17 Nm