Overview - Vacuum Pump, Vehicles With 1.8L/2.0L TFSI Engine

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Vacuum Pump, Vehicles With 1.8L/2.0L TFSI Engine Exploded View

Courtesy of AUDI OF AMERICA, LLC

Vacuum Pump
- Removing and installing. Refer to VACUUM PUMP, REMOVING AND INSTALLING .
Gasket
- Replace after removing
Vacuum Hose
Bolt
- 8 Nm +180°
- Replace after removing
Vacuum Line
- From EVAP Canister Purge Regulator Valve 1 -N80- to EVAP canister
Bolt
- 9 Nm
Bolt
- 9 Nm
Bolt
- Tightening specification. Refer to OVERVIEW - HIGH PRESSURE PUMP - CYNB .
High Pressure Pump
- Refer to HIGH PRESSURE PUMP, REMOVING AND INSTALLING - CYNB .
O-ring
- Replace after removing