Overview - Electric Vacuum Pump
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The Brake System Vacuum Pump -V192- is installed on vehicles with high-voltage system.
- Bolt
- 9 Nm
- Bolt
- Tightening specification. Refer to FRONT BUMPER, OVERVIEW - IMPACT MEMBER .
- Bracket
- For Brake System Vacuum Pump -V192-
- Brake System Vacuum Pump -V192-
- Removing and installing. Refer to BRAKE ELECTRIC VACUUM PUMP, REMOVING AND INSTALLING .
- Buffer
- Spacer Sleeve
- Nut
- 9 Nm
- Check Valve
- Checking. Refer to CHECK VALVE, CHECKING .
- Vacuum Hoses
- In the plenum chamber -arrow-.
Removing and installing. Refer to BRAKE BOOSTER PRESSURE SENSOR, REMOVING AND INSTALLING .