Check Valve With Vacuum Hose In Plenum Chamber, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

NOTE:

Coating the vacuum hose with water (not with oil) makes it easier to remove.

Installed position: the arrow (flow direction) faces the vacuum pump.

-- Follow all steps after connecting the battery. Refer to BATTERY, DISCONNECTING AND CONNECTING .