Brake Electric Vacuum Pump, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the right air intake grille -1- from the bumper cover -arrow-.
-- Remove the air duct hose from the charge air cooler by loosening the hose clamp -1-.
NOTE:
Ignore -arrows A and B-.
-- Move the air guide hose to the side.
-- Remove the bolts -arrows-.
-- Remove the Brake System Vacuum Pump -V192-. Disconnect the connector -2- and the vacuum hose -1- at the same time.
-- Free up the connector -2- on the bracket.
-- Remove the nuts -arrows- and then remove the Brake System Vacuum Pump -V192- from the bracket.