Overview - Front Brake Caliper, 1LF/1LL
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Brake Caliper
- Bearing Bushing
- Replace if damaged. Refer to BEARING BUSHING AND GUIDE PIN, REPLACING, STEEL BRAKES 1LF/1LL
- Quantity: 2
- Protective Cap
- Push on the bearing bushing
- Quantity: 2
- Seal
- Coat with a thin layer of lithium grease.
- Quantity: 2
- Brake Caliper Piston
- Removing and installing. Refer to BRAKE CALIPER PISTON, REMOVING AND INSTALLING, 1LF/1LL .
- Coat with a thin layer of lithium grease.
- Quantity: 2
- Protective Cap
- When damaged, install the complete repair kit.
- Coat with a thin layer of lithium grease.
- Quantity: 2