Bearing Bushing And Guide Pin, Replacing, Steel Brakes 1LA/1LJ: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the brake pads. Refer to BRAKE PADS, REMOVING AND INSTALLING, STEEL BRAKES, 1LA/1LJ .
-- Remove the bearing bushing -2- on the outside from the groove on the guide pin -1-.
-- Pull the guide pin outward from the bearing bushing.
-- Pull the bearing bushing out of the brake caliper.