Electromechanical Parking Brake Control Module -J540-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the Fuse Panel F -SF-. Refer to RELAY AND FUSE PANELS IN E-BOX, REMOVING AND INSTALLING .
-- If equipped, remove the lower frame for the control modules. Refer to CONTROL MODULES .
-- Vehicles without lower frame for the control modules: remove the nuts.
-- Vehicles with lower frame for the control modules: remove the Electromechanical Parking Brake Control Module -J540- from the threaded pins.
-- Slide the locking mechanism for the connection -2- forward.
-- Remove the Electromechanical Parking Brake Control Module -J540- -1- with the connector.
-- Disconnect the connector and remove the control module.