Brake Caliper, Removing And Installing, Ceramic Brakes, 1LN/1LW: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Torque Wrench 1332 40-200Nm :VAG1332

CAUTION:

This procedure contains mandatory replaceable parts. Refer to component overview and parts information prior to starting procedure.

Mandatory Replacement Parts

Bolts - Stub axle carrier to brake carrier

NOTE:

In the following description the brake caliper is removed with the brake pads. The brake hose remains connected.