LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1010 (Brake System (Mechanical Components - Service Information)) >> 46 Mechanical Components >> Front Brakes >> Balance Weight, Removing And Installing >> Installing

Balance Weight, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Clean the brake caliper around the balance weight.

-- Install the damper -2- in the brake caliper.

GWWA46-10419Courtesy of AUDI OF AMERICA, LLC

-- Install the new bolts -1- and tighten, refer to -item  1- (OVERVIEW - BRAKE CALIPER BALANCE WEIGHT).

-- Replace the existing protective cap.

scientia non olet · About LEMON Manuals