LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1010 (Brake System (Mechanical Components - Service Information)) >> 46 Mechanical Components >> Brake Pedal >> Brake Pedal, Removing And Installing >> Removing

Brake Pedal, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Vehicles with Manual Transmission: 

-- Remove the mounting bracket. Refer to MOUNTING BRACKET, REMOVING AND INSTALLING .

Continuation for All Vehicles: 

GWWA46-10041Courtesy of AUDI OF AMERICA, LLC

-- Loosen the bolt -3- for the pin.

-- Remove both clips -1- from the pin.

-- Remove the bolt -5- from the brake pedal -2- and mounting bracket -4-.

-- Remove the brake pedal.