Brake Pedal, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
If possible, leave the brake pedal stop installed; it could break the mount for the Brake Lamp Switch -F- if the brake pedal is released too quickly.
-- Slide the right retainer onto the pins.
-- Slide the pins from right to left through the axle in the brake pedal.
-- Secure the pins with the left retainer -1-.
- The pins must be secured with the retainers on both sides.
-- Install and tighten the bolt -3-.
-- Install mounting bracket. Refer to MOUNTING BRACKET, REMOVING AND INSTALLING .
WARNING:
Risk of accident!
- Make sure the brakes are working correctly before driving the vehicle for the first time.