LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1010 (Brake System (Mechanical Components - Service Information)) >> 46 Mechanical Components >> Brake Pedal >> Brake Pedal, Attaching To Brake Booster >> Procedure

Brake Pedal, Attaching To Brake Booster: Procedure

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Hold the pushrod ball head in front of the mount and push the brake pedal toward the brake booster in direction of -arrow- until the ball head engages audibly.

GWWA47-0034Courtesy of AUDI OF AMERICA, LLC

-- Install the Brake Lamp Switch -F-. Refer to BRAKE LAMP SWITCH, REMOVING AND INSTALLING .

WARNING:

Risk of accident!

  • Make sure the brakes are working correctly before driving the vehicle for the first time.
scientia non olet · About LEMON Manuals