LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1009 (Wiper & Washer Systems (Service Information)) >> 92 Wiper/Washer Systems >> Windshield Wiper System >> Windshield Wiper Motor -V-, Removing And Installing >> Installing

Windshield Wiper Motor -V-, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install In Reverse Order Of Removal. Note The Following: 

-- Insert the windshield wiper motor with the windshield wiper frame into the vehicle.

-- Tighten the bolts. Refer to Figure.

-- Press the cowl panel trim mount onto the body until it clicks into place.

-- Adjust the windshield wiper arms. Refer to WINDSHIELD WIPER ARMS, ADJUSTING .

scientia non olet · About LEMON Manuals