Windshield Washer Pump, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the left front wheel housing liner. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .
-- Disconnect the connector -3-.
-- Place a drip tray under the washer fluid reservoir.
-- Open the clip -1- in direction of -arrow- and disconnect the washer fluid hose -2- from the windshield washer pump.
-- Remove the Windshield Washer Pump -V5- -4- upward out of the washer fluid reservoir.