LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1009 (Wiper & Washer Systems (Service Information)) >> 92 Wiper/Washer Systems >> Windshield Washer System >> Washer Nozzles, Removing And Installing >> Removing

Washer Nozzles, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Unclip the washer nozzle -1- for the windshield washer system from the front lid in direction of -arrow-.

GWWA92-10096Courtesy of AUDI OF AMERICA, LLC

-- Release the clip -3- in direction of -arrow- and remove the washer fluid hose -2- from the windshield washer system washer nozzle.

GWWA92-10097Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -1-, if equipped.

scientia non olet · About LEMON Manuals