Washer Fluid Reservoir Filler Neck, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Place a drip tray under the washer fluid reservoir.
-- Remove The Plenum Chamber Cover. Refer to PLENUM CHAMBER COVER, REMOVING AND INSTALLING .
-- Remove the bolts -arrows- and remove the filler neck -1- with the filler tube from the windshield washer fluid reservoir to the right side through the opening in the body.