LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1009 (Wiper & Washer Systems (Service Information)) >> 92 Wiper/Washer Systems >> Windshield Washer System >> Overview - Windshield Washer System >> Washer FULID Reservoir Bolts Tightening Sequence And Specifications

Washer FULID Reservoir Bolts Tightening Sequence And Specifications

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Washer Fulid Reservoir Bolts Tightening Sequence
GWWA92-10149Courtesy of AUDI OF AMERICA, LLC

-- Tighten The Washer Fluid Bolts In The Sequence Specified: 

-- Tighten the screw -3- to 7 Nm. 

-- Tighten the screw-4- to 7 Nm. 

scientia non olet · About LEMON Manuals