Headlamp Washer System Spray Nozzle Mount, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the headlamp washer system washer nozzle. Refer to HEADLAMP WASHER SYSTEM WASHER NOZZLE, REMOVING AND INSTALLING .
-- Remove the front bumper cover. Refer to FRONT BUMPER COVER, REMOVING AND INSTALLING .
-- Open the clip in direction of -arrow- and remove the windshield washer fluid hose -3- from the mount.
NOTE:
Depending on the version, release buttons might be installed on the washer fluid hose connecting piece.
-- Remove the bolts -1 and 4- and the mount -2-.