Right/Left Front Abs Wheel Speed Sensor -G45- / -G47-, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
-- Before inserting speed sensor, clean hole inner surface and coat speed sensor all-round with Grease :G 000 650 .
-- Insert the speed sensor and tighten.
-- After installing, turn the steering all the way to the left and right, to make sure the speed sensor wiring has sufficient clearance.