LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> Electrical >> Gauges >> Interior Trim (Sedan) >> 70 Interior Trim >> Instrument Panel >> Instrument Panel Vent, Removing And Installing >> Instrument Panel Vent, Removing And Installing, Side Instrument Panel Vent >> Removing

Instrument Panel Vent, Removing And Installing, Side Instrument Panel Vent: Removing

Fig 1: Removing Instrument Panel Vent Using Hook 3438
GWWA70-10668Courtesy of AUDI OF AMERICA, LLC
NOTE:

The instrument panel vent has a hole on both sides for attaching the T-Handle Hook 3438.

-- Alternating between the sides, carefully remove the instrument panel vent -1- from the installation opening using the T-Handle Hook 3438.

-- Vehicles with illumination: Disconnect the connector on the instrument panel vent.

From MY 2012: 

Fig 2: Removing Instrument Panel Vent -2- Carefully From Tabs -1
GWWA70-11743Courtesy of AUDI OF AMERICA, LLC

-- Remove the MMI screen cover. Refer to MMI SCREEN COVER, REMOVING AND INSTALLING, FROM MY 2012 .

-- Remove the instrument panel vent -2- carefully from the tabs -1-.