Rear Final Drive Gear Oil, Checking

Special tools and workshop equipment required 

• Catch tray

-- Remove the sealing plug -arrow- for checking transmission fluid.

Fig 1: Locating Rear Final Drive Plug For Checking Fluid Level (0BD)

Courtesy of AUDI OF AMERICA, LLC

The fluid level is correct when the rear final drive is filled up the lower edge of the fluid fill hole.

• Transmission fluid specification, refer to ENGINE CODE, TRANSMISSION ALLOCATION, RATIOS AND CAPACITIES .

-- Install the screw plug -arrow- and tighten.

Tightening Specifications: 45 Nm