LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> Q5 >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating, Ventilation & Air Conditioning (2 Of 2) (As Of 06.2014) >> 87 Air Conditioning >> Front Heater And A/C Unit >> Fresh Air Blower -V2-, REMOVING AND INSTALLING >> Installing

Fresh Air Blower -V2-, REMOVING AND INSTALLING: Installing

Installation is carried out in the reverse order while observing the following.

-- If the locking mechanism -A- breaks or can no longer hold, the Fresh Air Blower -V2- -B- can also be secured to the air intake housing with a bolt -C-.

-- When installing, make sure the Fresh Air Blower -V2- -B- fits correctly in air intake housing.

-- Turn on the ignition.

-- Check the DTC memory for the Climatronic Control Module -J255- display and control head and erase any displayed malfunctions, if necessary using the Vehicle Diagnostic Tester in the "Guided Fault Finding  " function.

-- To check the function, perform the output diagnostic test mode for the A/C system using the Vehicle Diagnostic Tester in the "Guided Fault Finding  " function.

scientia non olet · About LEMON Manuals