Temperature Sensor after Hybrid Battery Evaporator -G757-, REMOVING AND INSTALLING: Removing

-- Turn off the ignition.

-- Remove the luggage compartment floor covering. Refer to LUGGAGE COMPARTMENT FLOOR PANEL, REMOVING AND INSTALLING , also see OVERVIEW - LUGGAGE COMPARTMENT FLOOR .

-- Bring the battery cooling module in the service position. Refer to BATTERY COOLING MODULE, BRINGING INTO SERVICE POSITION .

-- Disconnect the connector -1-.

Fig 1: Removing Temperature Sensor

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the Temperature Sensor after Hybrid Battery Evaporator -G757- out of the retainer by moving it back and forth -arrows- and then remove it.