Fuel Tank Leak Detection Control Module With Integrated Fuel Tank Pressure Sensor, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the Evaporative Emission (EVAP) canister. Refer to EVAP CANISTER, REMOVING AND INSTALLING .
-- Loosen the hose clamps to remove the ventilation hoses -3-.
-- Remove the bolts -1-.
-- Remove the Fuel Tank Leak Detection Control Module -J909- with integrated Fuel Tank Pressure Sensor -G400- -2- from the EVAP canister in direction of -arrow-.