LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> Q5 >> Repair and Diagnosis >> External Pages >> Different car >> Section 541 (3.0L - Crankshaft & Cylinder Block - Engine Code(S): CCBA, CGXC & CTUB (Sedan)) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Ribbed Belt TENSIONER, Removing And Installing >> Supercharger Ribbed Belt TENSIONER, Removing And Installing >> Removing

Supercharger Ribbed Belt TENSIONER, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2017 Audi S5, 2016 Audi S5, 2016 Audi S4, 2015 Audi S5, and 2015 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Ribbed Belt Tensioner -2- And Bolt -1-
GWWA13-10654Courtesy of AUDI OF AMERICA, LLC

-- Remove the supercharger ribbed belt. Refer to SUPERCHARGER RIBBED BELT, REMOVING AND INSTALLING .

-- Remove the bolt -1- and remove the ribbed belt tensioner -2-.

scientia non olet · About LEMON Manuals