Driver/Front Passenger Backrest Heating Element -Z7- / - Z9-, Removing And Installing, Standard Seat, Sport Seat Folding Seat: Removing

Fig 1: Bonding Individual Areas Of Heating Element In Sequence

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect cover from upholstery. Refer to BACKREST COVER AND CUSHION, SEPARATING .

-- Cut the electrical wire -3- off directly at the old backrest heating element -2-.

NOTE:

The old seat heating element remains on the upholstery -1- and the new seat heating element is bonded over it.

Ignore -A through D- and -arrows-.